Example of Poor Foil Transfer

Below is a picture of a label that shows poor transfer of foil to the adhesive/substrate. This is usually caused when the adhesive is not fully cured. The bottom label shows how the foiled area is removed when a tape test is done. This test is a good way to determine whether the adhesive is fully cured.

PLEASE NOTE - The picture can not show the metallic effect of the print due to the reflective nature of the foil.

 

  
   

this website is brought to you by:

  

  Last modified: May 20, 2004 Copyright © 2000-2004 by Image Group. All rights reserved.
Company and product names are trademarks or registered trademarks of their respective companies.