
Good quality UV lamps ensure
your success!
|
|
UV Curing Lamps
UV
Curing Lamps are medium pressure mercury-arc lamps producing high
intensity ultraviolet light. These lamps are well proven and widely used
for the curing of adhesives, inks and coatings.
They
are designed and manufactured as direct replacement lamps to meet the
specific needs of original equipment manufacturers worldwide.

click on the lamp to go to our
special lamp form
UV
Curing lamps are manufactured from high-clarity, vitreous silica,
normally referred to as quartz. Though expensive, quartz has the
property of high transparency to Ultraviolet light, particularly at the
short wave end of the spectrum where over 90% of the UV energy generated
is transmitted through the quartz. The electrode components are also
manufactured from the highest quality materials ensuring long and
reliable lamp life.
UV
Lamp Life
Medium
pressure mercury arc lamps do not normally fail suddenly and there can
be confusion in defining lamp life. Electrically, the lamp may operate
for many thousands of hours though, at an earlier stage it will have
ceased to emit adequate UV light. Electrical lamp life is therefore
irrelevant.
UV
output from the lamp declines gradually, as the UV transparency of the
quartz body deteriorates. The quartz changes from optically clear to
opaque, thus filtering out all useful UV. The rate of decline depends on
a number of factors; the switching frequency of the lamp, lamp and
electrode cooling efficiency, accurately matched power control, and the
cleanliness of the lamp surface.
Lamp
life must therefore be measured in hours of useful UV output and Image
Group supplied UV lamps are guaranteed to produce a high level of curing
efficiency for at least 1000 hours with correct handling.
Lamp
Types
UV
Curing Lamps are manufactured in lengths from 6cm to more than 300cm and
at power outputs up to 500 watts per cm.
Ozone
Free lamps are available as well. These lamps are manufactured in a way
that reduces the amount of ozone produced by the lamp, although lamp
life is reduced. In most cases, outside venting is not required when
ozone free lamps are used.
Technical
Specifications
|
Envelope:
|
High
clarity vitreous silica (Quartz).
|
|
Electrodes:
|
Tungsten
rod, overwound with thorium coated, thoriated tungsten wire,
fused to molybdenum foil.
|
|
End
Cap:
|
Manufactured
from either stainless steel, chrome-plated brass, or ceramic,
dependent on lamp design.
|
|
Lengths
Available:
|
From
6cm to over 300cm.
|
|
Power
Available:
|
Up
to 500 Watts per cm (1270 Watts per Inch).
|
We
supply large range of equivalent lamps to such makes as Fusion, Hanovia,
Heraeus, Mazda, Metal Box, Philips, Sylvania, Terno, Toshiba, Ushio,
Voltarc etc. However, it is not always possible to cross reference all
lamps by make or type alone. For this reason we offer you a service that
can enable us to identify an equivalent lamp, or help us to design a new
lamp to your specific requirements.
|
|